0FT G 4 FC 230 V
4.67 from 5 / 3 Vote|
|
Вземи на изплащане стоката, която желаеш, веднага! Получаваш одобрение от 15 мин. до 2 часа, за срок от 3 до 36 месеца и за суми от 100 до 10 000 лв. За повече подробности виж линка по-долу!
PFT G4 FC 230 V can be used with packaged materials in bags as well as directly from the silo/container using a lid
for delivery and dispenser for feeding the material through the PFT SILOMAT system.
The machine is used for ready-mixed dry solutions such as:
Gypsum plasters
Lime - gypsum plasters
Cement plasters
Lime plasters
Lime - cement plasters
Fango materials
Insulating plasters
Mortar
Exterior plaster
Self-leveling screeds
Masonry mortars
Mixed solutions
Insulation materials
0p>Functional principle:
The area for placing and storing the finished material is different from the area for mixing and pumping.
The dry material is placed in an inclined hopper to feed the material and through the wheel in the hopper
transported to the mixing chamber. PFT G 4 can be started and supplemented at any time.
The material feed wheel is driven separately and can be dismantled quickly by means of a central locking system.
Filling the hopper with bags:
PFT G 4 is a compact and easy to transport mixing pump that offers high-speed
delivery of the material, as well as a wide range of delivery and, can be combined with the entire range of machines
offered by PFT. Due to its low height, it is perfectly suitable for manual filling
on the hopper with bags of ready dry material. Ideal for use on small and medium construction sites.
Direct filling from silo:
The PFT G 4 mixing pump is designed according to the principle of modular design. Using PFT
hopper cover flange can be easily and quickly installed under any silo/container Well suited
for a delivery range up to 30 m.
Pneumatic filling with PFT SILOMAT:
Easy, fast, and efficient. PFT SILOMAT can be easily mounted with a flange to
silo/container using several grips. The prepared mixed dry solution is fed to
the mixing pump fully automatic and dust-free at the touch of a button. The machine is installed
directly at the place of use on-site, regardless of the distance from the silo/container
to the place of use. PFT SILOMAT pneumatic conveying equipment is available in various designs
Standard equipment
Motor with reducer 0.75 kW, 28 revolutions per minute
Pump motor 5.5 kW, 400 rpm
Power supply 230V, 50 Hz
User guide
Flow meter 100-1000 l / h.
Rotor - Stator SD 6-3 Slim
Air hose DN12 - 11 m Geka | Male part Ewo
Spray gun 25 mm cap F14 (flat) 200 mm Smartline
Cleaner with rod for cleaning the mixer
Air compressor DELTA 2, 230V
Water system pressure 2.5 Bar, 3/4
Working pressure - 20 bar
Transport capacity - 22 l / min
Transportation distance up to 30m.
G 4 pistol without grip
Mortar for mortar 25 mm
Height 910mm.
The capacity of the bunker - 145 l.
Size 1200/720/1530 mm