0EMIN AIRLESS EXTREM SAC 25KG*5*
0 from 5 / 0 VotePaste coating for a good finish on interior walls and ceilings.
Provides excellent surface preparation before painting or hanging coverings.
Suitable working time for improving surfaces to create an immaculate finish.
SEMIN ENDUIT DE LISSAGE is a coating with high resin content creating a very non-absorbent finish when completely dry.
This means that significantly less paint is required than with a standard coating.
Emulsion resin, calcium carbonate, rheological agent and various additives. SEMIN ENDUIT DE LISSAGE is a water-based coating.
The paste is white in colour.
• Wallpaper
• Paint
• Wallcovering
Interior walls and ceilings
• Plasterboards
• Plaster tiles
• Concrete
• Cement coating
• Old paintwork
• Sealants
• Sanded and sealed wood
• Plaster-based smooth finish coating (SEMIN HIGH BUILD, KEDOLIS HIGH BUILD...)
DTU 59.1.
0div background-color:="" class="as-h4-popup" fira="" font-size:="" style="box-sizing: border-box; margin: 0px 0px 10px; padding: 0px; border: 0px; font-variant-numeric: inherit; font-variant-east-asian: inherit; font-stretch: inherit; line-height: inherit; font-family: " vertical-align:="">APPLICATION
- Apply manually using a smoothing trowel or a filling knife.
- The maximum thickness will be 2 mm per coat.
- Allow to harden and remove imperfections before sanding, if necessary.
- Print the SEMIN ENDUIT DE LISSAGE if applying satin-finish or gloss paint.
- Clean tools in water.
- From 250 to 400 g/m².
- Approx. 12 hours depending on the thickness of the support and ambient conditions.
- Mix with plaster (interior use) or cement (exterior use) for all your minor filling jobs.
- Density of paste: 1.9
- Granulometry: fine
- pH: 7
- Adhesion: complies with NFT 30 608
- 4,10 and 25 kg buckets on a shrink-wrapped pallet.
- 6 months stored away from cold temps. and intense heat, unopened in original packaging.
- Classification AFNOR NFT 36.005 Family III - Class 2.
- The temperature during application and drying must be between 8 and 35°C.
- Surfaces must comply with DTU 59.1, i.e. be clean, dry, hard and free from all traces of release agent.
- On an uneven surface, apply a roughening coating first.
- Smooth surface, brush and remove dust from concrete, plaster panels and tiles.
- Wash, rinse and imprint old paintwork.