SEMIN Expert Liss AIRLESS is a ready-to-use putty that can be worked by hand and machine. Used for initial and final levelling of the substrate without dissolving or mixing the material. Perfect for direct use on absorbent surfaces such as lime-cement, gypsum, gypsum board or ytong. Application: - Graco T-max 506/657 low-pressure pump - we recommend working with 651 nozzles or less, the material may require dilution up to 1%, +/- 250 ml. - High-pressure units Airlessco HSS 9000, Wagner HC 950, Graco Mark VII, Titan 6900. To facilitate manual and roller application, we recommend a complete mixing to smooth the table. - Once the finish has hardened and dried, ventilate the rooms to avoid high humidity. High humidity helps to harden the product. Sand the dried plaster up to 4-5 days after application - Expert Liss can be applied with any type of airless unit, both manually and with a roller on the finished plaster. - Most often use abrasive paper # 150 or mesh # 220 for machine sanding Semin Airless polymer putties are designed for machine (airless) spraying and have a self-smoothing effect. Using this product allows you to reduce the processing time of walls and ceilings for subsequent painting or wallpapering. Thanks to the special composition, Semin Airless putty smoothes the surface itself and forms an even finish. This is the best product for processing large areas to prepare them for further decorative processing. And so that the surface becomes perfectly smooth, you can sand with sandpaper with a small grain layer up to 7 mm"/>

0ОЛИМЕРНАЯ SEMIN EXPERT LISS

0 от 5 / 0 голос
Любими

Загруженных документов
ТЕХНИЧЕСКАЯ КАРТА
1705939511__.pdf

Проверенное качество

  Быстрая доставка

  Высокое качество

   Гарантия


1820.30 RUB

Купи в комплект

83.40 RUB
РЕМОНТНАЯ ПАСТА SEM LIGHT
РЕМОНТНАЯ ПАСТА SEM LIGHT
19.20 RUB
GLASS FIBER VEIL FOR PLASTER SEMIN (SEMIN France), 50 SQ. M. / ROLL A00173
GLASS FIBER VEIL FOR PLASTER SEMIN (SEMIN France), 50 SQ. M. / ROLL A00173
94.05 RUB
SEMIN CE 78 PERFECT LIGHT 20кг.
SEMIN CE 78 PERFECT LIGHT 20кг.
57.78 RUB
SEMIN AIRLESS FIN
SEMIN AIRLESS FIN
57.78 RUB
SEMIN SEM-JOINT COMPOUND
SEMIN SEM-JOINT COMPOUND
61.15 RUB
на 12 вноски по 181.73 лв.
**** ПАЗАРУВАЙ НА ИЗПЛАЩАНЕ С TBI PAY! ****

Вземи на изплащане стоката, която желаеш, веднага! Получаваш одобрение от 15 мин. до 2 часа, за срок от 3 до 36 месеца и за суми от 100 до 10 000 лв. За повече подробности виж линка по-долу!

ИНФОРМАЦИЯ ЗА ОНЛАЙН ПАЗАРУВАНЕ НА КРЕДИТ!
0p font-size:="" style="display: inherit; width: 1564px; color: rgb(51, 51, 51); font-family: sans-serif, Arial, Verdana, " trebuchet="">SEMIN Expert Liss AIRLESS is a ready-to-use putty that can be worked by hand and machine. Used for initial and final levelling of the substrate without dissolving or mixing the material. Perfect for direct use on absorbent surfaces such as lime-cement, gypsum, gypsum board or ytong.
Application:
- Graco T-max 506/657 low-pressure pump - we recommend working with 651 nozzles or less, the material may require dilution up to 1%, +/- 250 ml.
- High-pressure units Airlessco HSS 9000, Wagner HC 950, Graco Mark VII, Titan 6900. To facilitate manual and roller application, we recommend a complete mixing to smooth the table.
- Once the finish has hardened and dried, ventilate the rooms to avoid high humidity.
High humidity helps to harden the product. Sand the dried plaster up to 4-5 days after application
- Expert Liss can be applied with any type of airless unit, both manually and with a roller on the finished plaster.
- Most often use abrasive paper # 150 or mesh # 220 for machine sanding
Semin Airless polymer putties are designed for machine (airless) spraying and have a self-smoothing effect.

Using this product allows you to reduce the processing time of walls and ceilings for subsequent painting or wallpapering.

Thanks to the special composition, Semin Airless putty smoothes the surface itself and forms an even finish.
This is the best product for processing large areas to prepare them for further decorative processing.
And so that the surface becomes perfectly smooth, you can sand with sandpaper with a small grain layer up to 7 mm

Array

Array