0EMIN EXPERT LISS 25кг.PAILS

0 от 5 / 0 голос

Любими

Номер по каталогу: Array

Загруженных документов

ТЕХНИЧЕСКАЯ КАРТА

Проверенное качество

Быстрая доставка

Высокое качество

Гарантия

Номер артикула: 1157

БРЕНД:

Количество:

4149.24 RUB ~~4442.21 RUB~~ Вы экономите 292.97 RUB

Купи в комплект

Кол:

66.00 RUB

Кол:

83.40 RUB

Кол:

SEMIN CE 86 НАПОЛНИТЕЛЬ ДЛЯ ШВОВ 25 кг.

75.00 RUB

Кол:

CE78 TRES RAPIDE FILLER

44.40 RUB

Кол:

CE78 HYDRO

22.50 RUB

Кол:

SEMIN CE86 PATE

41.36 RUB

на 12 вноски по 414.23 лв.

**** ПАЗАРУВАЙ НА ИЗПЛАЩАНЕ С TBI PAY! ****

Вземи на изплащане стоката, която желаеш, веднага! Получаваш одобрение от 15 мин. до 2 часа, за срок от 3 до 36 месеца и за суми от 100 до 10 000 лв. За повече подробности виж линка по-долу!

ИНФОРМАЦИЯ ЗА ОНЛАЙН ПАЗАРУВАНЕ НА КРЕДИТ!

0p>SEMIN Expert Liss AIRLESS is a ready-to-use putty that can be worked by hand and machine.
It is used for the initial and final levelling of the base without dissolving or mixing the material.
Perfect for direct use on absorbent surfaces such as lime-cement, gypsum plasters, plasterboard or itong.
Application:
- Graco T-max 506/657 low-pressure pump - we recommend working with 651 nozzles or less, the material may require dilution up to 1%, +/- 250 ml.
- High-pressure units Airlessco HSS 9000, Wagner HC 950, Graco Mark VII, Titan 6900.
- To facilitate manual and roller application, we recommend a thorough mixing to smooth the table.
- Once the finish has hardened and dried, ventilate the rooms to avoid high humidity.
High humidity helps to harden the product. Sand the dried plaster up to 4-5 days after application
- Expert Liss can be applied with any type of airless unit, both manually and with a roller on the finished plaster.
- Most often use abrasive paper # 150 or mesh # 220 for machine sanding
Semin Airless polymer putties are designed for machine (airless) spraying and have a self-smoothing effect.

Using this product allows you to reduce the processing time of walls and ceilings for subsequent painting or wallpapering.

Thanks to the special composition, Semin Airless putty smoothes the surface itself and forms an even finish.
This is the best product for processing large areas to prepare them for further decorative processing.
And so that the surface becomes perfectly smooth, you can sand with sandpaper with a small grain layer up to 7 mm