0OLYMER PLASTER SEMIN EXPERT LISS

0 from 5 / 0 Vote
Любими


Proven quality

  Fast Delivery

  Hight Quality

   Warenty


09.66 EUR

Купи в комплект

83.40 EUR
SEM LIGHT REPAIR PASTE
19.20 EUR
SEMIN AIRLESS FIN
57.78 EUR
SEMIN SEM-JOINT COMPOUND
61.15 EUR

Този продукт не е в наличност. Моля изберете друг от каталога.

0p>SEMIN Expert Liss AIRLESS is a ready-to-use putty that can be worked by hand and machine. Used for initial and final levelling of the substrate without dissolving or mixing the material. Perfect for direct use on absorbent surfaces such as lime-cement, gypsum, gypsum board or ytong.
Application:
- Graco T-max 506/657 low-pressure pump - we recommend working with 651 nozzles or less, the material may require dilution up to 1%, +/- 250 ml.
- High-pressure units Airlessco HSS 9000, Wagner HC 950, Graco Mark VII, Titan 6900. To facilitate manual and roller application, we recommend a complete mixing to smooth the table.
- Once the finish has hardened and dried, ventilate the rooms to avoid high humidity.
High humidity helps to harden the product. Sand the dried plaster up to 4-5 days after application
- Expert Liss can be applied with any type of airless unit, both manually and with a roller on the finished plaster.
- Most often use abrasive paper # 150 or mesh # 220 for machine sanding
Semin Airless polymer putties are designed for machine (airless) spraying and have a self-smoothing effect.

Using this product allows you to reduce the processing time of walls and ceilings for subsequent painting or wallpapering.

Thanks to the special composition, Semin Airless putty smoothes the surface itself and forms an even finish.
This is the best product for processing large areas to prepare them for further decorative processing.
And so that the surface becomes perfectly smooth, you can sand with sandpaper with a small grain layer up to 7 mm

CUSTOMERS WHO VIEWED THIS PRODUCT ALSO VIEWED